Item # SB-4, Steel shot on Finishing Associates, Inc.


All Categories > Abrasive Media and Deburring/Polishing Compounds. > Ceramic Media > Dry Process Centrifugal Barrel Finisher > Zinc-Base Shotblasting Abrasives Briteshot® > Item # SB-4


	Item # SB-4 Steel shot

Printable Page

Email This Page

Save To Favorites

larger image

Steel shot
BRITESHOT is zinc-base blasting abrasives developed in pursuit of the safety of shotblasting light-alloy works. Its explosion sensitivity is less than 1/10 of that of aluminum.

Specifications

Hardness (HV)		440-480

Specific Gravity		7.5

Bulk Density		4.4

Consumption Rate		Slightly lower

Deburring Effect		High

Safety		Slightly risky

Finish Tone		Normal

Abrasion on Machine		High

Density		7.45 g/cm³

Mesh		24 28 42 48

Size		0.300 mm 0.335 mm 0.600 mm 0.710 mm

Size distribution		0% Max 10% Min 80% Min 90%

Capability		Superior deburring capability The specific gravity of BRITESHOT is 2.5 times higher than aluminum. The superior performance of deburring by BRITESHOT is mainly due to its high specific gravity. Materializing a substantial cost cutdo

Microstructure		Finely tempered martensite

Finishing Associates Inc. • 1610 Republic Road • Huntingdon Valley, PA 19006
Phone (215) 953-1340 • Fax (215) 953-1342
E-mail:fasalesdesk@finishingassoc.com

©2004 Finishing Associates Inc. • All rights reserved.

Equipment

Item # SB-4 Steel shot

Hardness (HV)

Specific Gravity

Bulk Density

Consumption Rate

Deburring Effect

Safety

Finish Tone

Abrasion on Machine

Density

Mesh

Size

Size distribution

Capability

Microstructure